Brief: The CNC router spare for sale here is RichAuto A18E A18S DSP controller, which is a popular 4 axis CNC Router controller. A18E and A18S is same model actually; the only difference between them is the language on keyboard, A18E is in English only while A18S in both English and Chinese.
Related item: RichAuto A11 DSP
Advantage
Compared with NC Studio contoller, it has two advantages:
It controls machine motion independently, no need connection a PC.
RichAuto A18 DSP cost less than NC Studio.
Application
RichAuto A18 DSP is always used on 4 axis cnc router and 4 axis rotary cnc machine.
Quick Details
Applicable industry: wood working
Maximum simultaneous axis: 4
Display: Three-inch monochrome
I/O port: 8 input, 8 output
Full Set Packing List
Wiring board (8 input 8 output) – 1 Piece
50-pin communication cable – 1 Piece (for connection between hand-held controller and wiring board)
USB data cale – 1 Piece (for connection between hand-held controller and PC)
RichAuto Auto Now A18 DSP Controller Features:
It is a 4-axis simultaneous CNC controller, real 4 axis motion control.
The rotary axis can be freely defined with A, B or C.
The 4th axis can be a normal axis or a rotary axis.
8 input and 8 output I/O interface board.
Support 9 workpiece coordinate, 8 breakpoints save.
Support both mobile and fixed tool calibration; can set up calibration position and speed, etc.
Manual high and low speed switching, fine adjustment, distance and other functions.
Support XYZ axis driver, inverter, emergency stop, hard limit alarm functions.
Breakpoint memory and power-down memory.
Support array, milling plane, zoom, line selection, automatic division special function requirements.
Stop status and position setup.
Technical Parameter
| Model. No. |
RichAuto A18 |
|
Processor |
DSP |
|
RAM |
512M |
|
Display |
3-inch monochrome |
|
Communication interface |
USB |
|
Simultaneous axis |
4 |
|
Driving |
stepper and servo |
|
Resolution |
0.001mm |
|
Power failure protection |
yes |
|
Breakpoint memory |
yes |
|
Working power |
DC 24V |
|
Manual Mode |
Continuous, step, distance |
|
Interpolation method |
Line, arc, spline |
|
Soft / hard limit |
support |
|
Maximum pulse frequency |
1MHz |
|
Password setup |
yes |
|
System language |
English and Chinese |
Video of RichAuto A18 DSP
If you like this controller, please inquire now.
【 Go Back 】 | 【 Close this window 】