Slatwall making is one application of EagleTec-1325MS4 multi spindle cnc router machine. As a slatwall cutting machine, design of four spindle increases the production output greatly. So multi spindle cnc machine is better on production efficiency than one head wood router. To start a slatwall production shop, besides slatwall machine, second thing you need get is the slatwall router bits. If you own both slatwall machine and router bits, you can start the production of slatwall. To learn more, please click how to use cnc router to make slatwall

Besides slatwall production, EA-1325MS4 is also ideal for wood carving jobs, that’s why many clients who make European furniture get this model also.

Application

Material: Solid wood, MDF, plastic, PVC, acrylic, and more.

Field: Slatwall cutting, European style furniture making includes bed, chair, sofa and more. 

Technical Parameter of multi spindle cnc router

Each spindle Working Size | 325x2500x300 mm - 4

Max. Working Size if using one spindle | 1100x2500x300mm

Max. Traveling Speed | 30,000 mm/min

Max. Working Speed | 12,000 mm/min

X Y Transmission | Helical rack and pinion 

Z Transmission | Rolling ball screw

Guide Rail | Hiwin linear guide way and carrier

Spindle | 3.0kw, water cooling 0-24,000 RPM

Collet Size | ER20, available diameter of cutter 3.175-12.7mm

Driving Motor | Stepper with big torque

Motor Driver | YAKO YKA2811MA

Controller | Richauto DSP

Command | G-code

Software | ArtCAM, Type 3 and Wentai

Working Table | T-slot design PVC vacuum table

Work-Holding | By vac-sorb or clamp, both available

Vacuum Pump | 5.5KW water ring, 230CMB/hour flow rate

Power Supply | AC 380V/50-60Hz, 3 Ph 4 Wires

Net Weight | 1500KGS

 

Features

1) Design of four spindles gives slatwall machine EA-1325MS4 more production output capacity.

2) Water cooling spindle is quite operation, low noise.  

3) Dual pneumatic counter-balance cylinder to allow very fast and accurate Z-axis positioning. 

4) Frame is welded with seamless steel structure; processed by vibrating stress relief (VSR) to reduce residual stress; and it is supported by 6 legs with adjustable leveling feet.

5) Beam is made of steel. A steel beam is superior to a aluminum in its ability to

suppress and absorb the forces created during cutting. It is internally ribbed in order to stiffen the assembly; this design is minimizing the vibration while increasing accuracy and repeatability.    

6) The X and Y axis motion is via a rack and pinion drive, which is hardened for

extremely long life and ground for a very good accuracy; The Z axis is driven by a hardened Germany rolling antibacklash ball screw.

7) Each axis of motion is supported on high precision linear guide ways. Hiwin linear

guides allow for higher feed speeds and a better quality of cut. 

8) The Y-axis uses a dual drive, one for each side of the gantry.

9) Support re-carving after break point and power failure.

10) All the linear guides are centrally lubricated from a central system.