Other leadshine hybrid servo products you may have interest

leadshine hybrid servo hbs1108

cnc router easy servo leadshine hbs2206

Leadshine Easy Servo Driver HBS758 Features

1) Using the latest motor control DSP chip and vector closed loop control technology, the leadshine hybrid servo kit will not have the problem of losing step; At the same time, it can obviously improve the high speed performance of the motor, reduce the heat of the motor and reduce the vibration of the motor.

2) Using leadshine easy servo system, the machining speed and precision of cnc router can be improved and the energy consumption of machine can be reduced.

3) When the motor is continuously overloaded, the leadshine hybrid servo driver will output the alarm signal in time, which has the same reliability as the AC servo system.

4) The leadshine easy servo driver hbs758 is fully compatible with the 86 series hybrid servo motor, and the cost is only half the cost of the AC servo system.

5) Light isolation signal input, strong anti-interference ability.

6) External digital debug panel, convenient parameter setting and monitoring.

7) Serial communication function, current, subdivision can be adjusted arbitrarily, signal edge, alarm output logic and other functions can be adjusted.

8) Variable current control, motor heating is greatly reduced.

9) Ultra low vibration noise.

Leadshine Easy Servo Driver HBS758 Technical Parameter

Input Voltage Range | 50 ~ 80V AC

Maximum Peak Current | 8A

Subdivision Range | 200 ~ 51200ppr
Signal Input | differential / single end, pulse / direction or double pulse, signal level 5~24V compatibility

Impulse Response Frequency | 200KHz

Protection | over - voltage, over - current, tracking error excess

Leadshine Easy Servo Motor 86HBM40-1000 Technical Parameter (matched motor)

Flange Size | 86mm (NEMA34)

Holding Torque | 4 N.m

Rated Phase Current | 6 A

Motor Length | 102mm

Rotor Moment of Inertia | 1.4 kg.cm2

Motor Weight | 2.3KG

Radial Runout | 0.025mm Max (5N load)

Axial Runout | 0.075mm Max (10N load)

Built-in 1000 wire incremental photoelectric encoder

Leadshine Easy Servo Motor 86HBM80-1000 Technical Parameter (matched motor)

Flange Size | 86mm (NEMA34)

Holding Torque | 8 N.m

Rated Phase Current | 6 A

Motor Length | 140mm

Rotor Moment of Inertia | 2.8 kg.cm2

Motor Weight | 4KG

Radial Runout | 0.025mm Max (5N load)

Axial Runout | 0.075mm Max (10N load)

Built-in 1000 wire incremental photoelectric encoder

Leadshine Easy Servo Motor 86HBM80-BZ-1000 Technical Parameter (matched motor)

Flange Size | 86mm (NEMA34)

Holding Torque | 8 N.m

Rated Phase Current | 6 A

Motor Length | 173mm

Rotor Moment of Inertia | 3.1 kg.cm2

Motor Weight | 4.8 KG

Radial Runout | 0.025mm Max (5N load)

Axial Runout | 0.075mm Max (10N load)

Built-in 1000 wire incremental photoelectric encoder

Purchase all cnc spare by stop here. Enquire now if have interest!